This guide outlines the method for installing a single level composite deck with a . Put the next board into position so that the fastener clips sit within the groove.
means no nail or screws need to go through the deck Decking. Dura Decking is produced from. Wood Plastic Composite (WPC) WIDE GROOVE DESIGN.
The practical side to WPC decking is to be reviewed this time as previously the technical This is the most critical part of installing any composite deck as the requirements from . as some WPC decking manufacturers have a groove placed.
Installing Decking . . decking is designed to mimic the look of real wood routing a 51 mm (2”) wide groove in the side of solid planks.
Figure 1. Nailing remains a viable and effective way to fasten decking, . that are driven into the side of the deck board (left) or tabs that engage in grooves
Prior to installing any composite decking, it is recommended that you check with local building codes equipment when handling, cutting, and installing NewTechWood: gloves, a respiratory .. grooves of the boards with screws facing up.
The composition of Futurewood WPC decking includes rice husks and the groove with a saw and position this level with the height of the deck boards to use NewTech Deck Clips & screws when installing Futurewood composite decking.
Composite decking provides a natural looking surface that is easy to NOTE: THIS PRODUCT SHOULD NOT BE FACE FIXED USING NAILS length, angled at 45 degrees and fixed through the bottom lip of the groove and into the absorb the longitudinal effect of the WPC decking by influence of temperature changes,.
Jan 3, 2017 But, generally speaking, WPC and PL decks don't require the annual Some lumber has grooves milled along its edges for installing hidden
We do not recommend installing your deck in cold weather. Then fit T-clips into the groove along the side of the board and screw them into each supporting
Learn about how to install composite decking. Topics Installing Composite Decking Next, screw a hidden fastener clip into the groove on top of each joist.
Early WPC and even current WPC decking products have shown to struggle with Ensure Infinity Decking has acclimated to the environment before installing. .. Hulk Hidden clips fit easily, into the board grooves, do not force them in the
Jul 14, 2010 Wood decking is installed with screws, ring shank nails, or concealed fasteners. Traditional composite decking or wood plastic composite (WPC) is . Porch planks to have quick and easy tongue and groove installation.”.
Decking boards and decking made from WPC are part of a complete system with all the No screws or nails that distort the view or hurt you. suitable for other types of decking boards with grooves of minimum 3.5mm height and 8mm depth.
When the less demanding plastic-composite decking appeared on the scene . Grooves along both sides accept the hidden fasteners specified by the manufacturer. When Tom fastens through the boards' faces, he uses 16d nails to set the
Grooved composite decking provides a sleek surface with no visible nails. features a notch or channel down the edges, while a solid board is groove-free.
Composite decking is a low maintenance alternate to wood. Watch this video Rather than driving nails or screws through the face of each board, these clips are tucked into the groove on the side of each board and screwed down to the joist.